The RECmax P series are 2- and 4-pole circuit breakers connected to a compact motor and internal control unit that enables automatic reclosing system.
After triggering, the switch reconnects following a sequence of 3 reconnections, with 3 minutes between resets. If the unit is not able to reconnect after 3 attempts, it remains triggered until a manual or remote reset is made. They can also be connected remotely to an external control. It has two inputs that through voltage-free external signals, order the opening (input O) and subsequent closing (reclosing system) of the automatic switch (input I) . They function as protection against shortcircuit and overload, and can also be used as a remote circuit breaker.
The switch status is indicated by LED signals on the device’s front panel. An green ON LED indicates that the device is in service; a red OFF LED indicates that the device is triggered.
A TEST/RESET of the device can be performed by pressing a button to check the triggering and then reset the device.
It also has two single-contact outputs for signalling the status and the cause of the opening and closing of the automatic switch (trigger, manual/Test).